TANDBERG 8000 MXP
112
Using the three last profiles you can enter the name of a profile, prefix and network selection.
This is useful if you have a fixed prefix for your service provider.
4.8.4 Data Port
The system provides two standard RS232 serial ports to allow a computer to be connected for
data transfer and control purposes. Note that when connecting to a PC the connecting cable
must be a straight through RS232 cable.
Baud Rate, Parity, Databits and Stopbits
If you wish to connect a PC to Data port 1, you must ensure that the PC and the system are
identically configured. The available settings are:
Baud
Rate
Parity
Databits
Stopbits
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
None, Odd, Even
7, 8
1, 2
Mode
Data port 1 supports 3 different modes:
Data
Provides a transparent data channel. This channel can be used for many
different purposes such as file transfer, application sharing and more. When
using this mode, it is necessary to have a TANDBERG system at the far end.
Control
The control interface provided by the data port supports a subset of the
Hayes command set as well as a comprehensive set of system specific
commands. This mode maintains communication with the data port
’
s
command interpreter at all times. All features available from the hand-held
remote control can be accessed through the data port.
Modem
Allows you to control the system externally via a PC as in Control Mode.
Once a call is established, Data port 1 will automatically switch to Data
mode. When the call disconnects, Data port 1 switches back to Control
Mode.
Data Port 2
Data port 2 is dedicated to the main camera and will not be available in standard
configuration. The Data Port 2 menu contains the same items as the Data Port 1 menu; Baud
rate, Parity, Databits, Stopbits except for the Mode, which has VISCA and Auto
selections.Mode.
The system will automatically detect WAVE cameras. If you are using a camera supporting
the VISCA protocol, select Mode: VISCA.
If Mode is Auto and no camera is connected to the Data port 2, the Baudrate, Parity, Databits
and Stopbits settings will be enabled.
Summary of Contents for F1 D13353.02
Page 5: ...Table Of Contents v Glossary 159...
Page 6: ......
Page 18: ...TANDBERG 8000 MXP 12...
Page 162: ...TANDBERG 8000 MXP 156 6 13 Appendix 13 Declaration of Conformity...
