Installation
TANDBERG Director Videoconferencing System
25
System Options
The
SYSTEM
OPTIONS
button allows for limited modification of setup of the codec. Modification of
these setting from the default values may affect the operation of the Director system. The main
item of note is the
‘Camera Model’
setting. The system supports VISCA controlled cameras and
therefore is selectable between the W.A.V.E II and VISCA controlled cameras. VISCA cameras
would use the Aux 1 Output on the Director Rear Interface Panel.
Edit Directory
Allows the user to enter and edit directory entries for the Director system. First, update the
directory by following the instructions below. Then select the ‘Add New Entry’ button to add a new
directory entry, or select an existing directory entry to edit that information. Refer to
‘V
IDEOCONFERENCE
O
PERATION
’ >
‘E
DITING
S
PEED
D
IAL
D
IRECTORY
’
for more information.
Update Directory
Click
U
PDATE
D
IRECTORY
to set the initial directory placeholders that will be negotiated between
the codec and control device for the Director system. Any time the codec directory is updated with
new or modified entries through any other method than using the
E
DIT
D
IRECTORY
method
discussed above (i.e. Codec Data port, Web browser, Telnet, or TMS), the control device should be
“synchronized” with the updates made in the codec by clicking
U
PDATE
D
IRECTORY
on the
T
OOLS
screen to have the latest modifications displayed.
N O T E
I
F
CONNECTING
TWO
CAMERAS
,
THEY
MUST
BE
IDENTICAL
-
YOU
CANNOT
HAVE
ONE
WAVE II
CAMERA
AND
ONE
S
ONY
CAMERA
.
T
HEY
MUST
BOTH
BE
WAVE II
CAMERAS
OR
BOTH
BE
A
VISCA
CONTROLLABLE
CAMERA
OF
THE
SAME
MAKE
AND
MODEL
.
