TANDBERG Border Controller User Manual Download Page 103

Page: 103 / 118

TANDBERG Border Controller User Guide

Page 103 of 118

18.4.

History

The history root command,

xhistory

, is used to display historical data on the Border Controller.

To list all xhistory commands type:

xhistory ?

To list all history data, type:

xhistory

To show a specific set of history data, type:

xhistory <name>

18.4.1.

calls

xhistory calls

isplays history data for up to the last 255 calls handled by the Border Controller. Call entries are added

to the Call History on call completion. Call histories are listed in reverse chronological order of
completion time.

xhistory calls call <index>

Displays data for the call with the specified index.

18.4.2.

registrations

xhistory registrations

Displays history data for up to the last 255 registrations handled by the Border Controller. Registration
entries are added to the Registration History on unregistration of H.323 entities. Registration histories

are listed in reverse chronological order of unregistration time.

xhistory registrations registration <index>

Displays data for the registration with the specified index.

Summary of Contents for Border Controller























































































































Search results

Summary of Contents for Border Controller

Reviews:

Related manuals for Border Controller

Brands by name

Popular brands

TANDBERG Border Controller, User Manual

Search results

Summary of Contents for Border Controller

Reviews:

Related manuals for Border Controller

Brands by name

Popular brands