![TANDBERG 550 MXP User Manual Download Page 298](http://html.mh-extra.com/html/tandberg/550-mxp/550-mxp_user-manual_816740298.webp)
TANDBERG 550 MXP
284
Streaming TTL/Router Hops:
Used for streaming data to limit how many routers the data should
pass before it is rejected.
Streaming Video Rate:
Defines the Video streaming rate from the system.
SVGA:
Super VGA. (800x600)
SXGA:
Super extended Graphics Array (1280x1024)
System information:
Lists system numbers, line status, software version and other useful
information.
System name:
Identifies a videoconferencing system
T
T1:
Network type, 24 channels. Default for NTSC versions.
T1 Line Coding:
Indicates how the signals on the line should be coded. If parts of the systems
use restricted coding, this should be selected.
Take chair:
Request chairmanship of the conference. If no one else is chairman, the request is
granted.
TCS-4:
Used to address different systems on a LAN when dialing in via a gateway.
Terminal Names:
Lists the site numbers or name (if supported) of other sites connected in the
conference.
Terminate meeting:
The chairman can terminate the conference, i.e. all participants are
disconnected.
TMS:
TANDBERG Management Suite
Touch Tones:
To dial extension numbers etc. during a call, use touch tones in order to get tones
instead of preset on the number keys.
Tracker:
The tracker is a small infrared remote control device made to steer the camera to any
desired location within the room.
TSC-1:
TCS-1 is used for H243 password on H320 MCU's
V
VCR:
Video Cassette Recorder
VGA:
Video Graphics Array. (640 x 480)
VGA Out Quality:
Changes the resolution of the VGA signal available in the VGA Out connector
at the rear of the codec.
View Settings:
Displays all the system settings in a read only format.
View site:
View any participant in the conference other than the participant currently On Air. Can
be used by all conference participants.
VNC:
Virtual Network Computing.
Voice Switched:
The active site will be displayed in full screen during a MultiSite conference.
Summary of Contents for 550 MXP
