manualshive.com logo in svg

TANDBERG 550 MXP, User Manual

Share
Download
TANDBERG 550 MXP User Manual Download Page 246

TANDBERG 550 MXP 

232 

IP type of service (ToS) 
IP adaptive bandwidth management (including flow 
control) 
Auto gatekeeper discovery 
Dynamic playout and lip-sync buffering 
Intelligent Packet Loss Recovery (IPLR) 
H.245 DTMF tones in H.323 
Cisco CallManager integration using ECS 
IP Address Conflict Warning 
Date and Time support via NTP 
Call Services 

Directive 1999/5/EEC (R&TTE Directive) 
- Standard TBR3 
Approved according to UL 60950 and CAN/CSA  
C22.2 No. 60950 
Complies with FCC15B Class B 
 

UNIT DIMENSIONS 

Height: 5.1"/13.0 cm 
Width: 14.9"/38.0 cm 
Depth: 7.9"/20.0 cm 
Weight: 5.0 lbs/2.3 kg 
 

 
 

PRODUCT RELIABILITY / MTBF 

The predicted reliability is expressed in the expected random Mean Time Between Failures (MTBF) for the electronic 
components based on the Power On Hours: 
Power On Hours (POH) > 69 000 hours 
Useful Life Cycle > 6 years  
ISO 9001 certificate is available upon request 
 
* Requires TANDBERG Management Suite 9.0 or newer 
 
System features vary depending on network selection and software package. All specifications are subject to change 
without notice. TANDBERG is a registered trademark or trademark of TANDBERG in the U.S. and other countries. 
RealPlayer is a trademark or a registered trademark of RealNetworks, Inc. QuickTime is a registered trademark of Apple 
Computer, Inc., registered in the U.S. and other countries. Microsoft and NetMeeting are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are property of their 
respective owners. Contains iType

TM

 from Agfa Monotype Corporation 

 
Service availability may vary from region to region. Please contact your TANDBERG reseller for more information. 

Summary of Contents for 550 MXP














































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands