TANDBERG 550 MXP, User Manual

Page: 177 / 301

Administrator Settings
163
5.5.2 Output Level Settings
The audio out is intended for connection to televisions or audio amplifiers. Digital mode (SPDIF)
is supported when configuring the output to SPDIF mode by the web interface or dataport/XML.
Adjust the audio output level to the loudspeakers.
The volume keys on the remote control also adjust the level of the audio output.
Signal levels -
line level
outputs* Absolute max.
output level Nominal
level
Output menu
level settings Vpp dBu dBu
0.0 dB
1.2 Vpp -5.5 dBu -23.5 dBu
1.5 dB 1.4 Vpp -4.0 dBu -22.0 dBu
3.0 dB 1.6 Vpp -2.5 dBu -20.5 dBu
4.5 dB 1.9 Vpp -1.0 dBu -19.0 dBu
6.0 dB 2.3 Vpp 0.5 dBu -17.5 dBu
7.5 dB 2.8 Vpp 2.0 dBu -16.0 dBu
9.0 dB 3.3 Vpp 3.5 dBu -14.5 dBu
10.5 dB 3.9 Vpp 5.0 dBu -13.0 dBu
12.0 dB
4.6 Vpp 6.5 dBu -11.5 dBu
13.5 dB 5.5 Vpp 8.0 dBu -10.0 dBu
15.0 dB 6.5 Vpp 9.5 dBu -8.5 dBu
16.5 dB 7.8 Vpp 11.0 dBu -7.0 dBu
18.0 dB 9.2 Vpp 12.5 dBu -5.5 dBu
19.5 dB 11.0 Vpp 14.0 dBu -4.0 dBu
21.0 dB 13.0 Vpp 15.5 dBu -2.5 dBu
22.5 dB 15.5 Vpp 17.0 dBu -1.0 dBu
* Applies to Output 1 at volume setting 15.
Note that for the dBu value for input clipping level and absolute max output level, a sine waveform
is assumed. If numbers in dBV are required, dBV value is 2.2 dB lower than the dBu value, e.q. -
10 dBu equals -12.2 dBV
Please see Interfaces for details on the audio connectors.