START HERE
3
Connect the Cables
WARNING!
Before performing any installation or maintenance procedures, be sure that the library power switch is in the off position and that the power
cord is disconnected from the library and the outlet.
WARNUNG!
Vor der Ausführung von Installations- oder Wartungsarbeiten ist darauf zu achten, daß der Library-Netzschalter auf “Aus” gestellt ist und
daß das Anschlußkabel vom Library und der Steckdose entfernt ist.
¡PRECAUCIÓN!
Antes de realizar cualquier procedimiento de instalación o de mantenimiento, comprobar que el interruptor de alimentación de la
biblioteca está apagado y que el cable de alimentación no está enchufado ni a la biblioteca ni a la toma de corriente.
SCSI connections (LVD only):
1 — Connect SCSI cable and Terminator*
2 — Connect Power cord
S
T
T
S
E
P
P
E
Power switch (Off=0 On=I )
Ethernet port
(see Product Manual for addressing; the default setting is DHCP enabled)
Important:
LTO-2, LTO-3, and LTO-4 Ultra 160 SCSI tape drives are Ultra 160 SCSI devices and require a minimum Ultra 160 non-RAID SCSI host us adapter card,
Ultra 160 rated SCSI cabling, and an Ultra 3 active Ultra 160 SCSI terminator. LTO-4 Ultra 320 SCSI tape drives are Ultra 320 SCSI devices and require a minimum
Ultra 320 non-RAID SCSI host bus adapter card, Ultra 320 rated SCSI cabling, and an Ultra 3 Active Ultra 320 SCSI terminator. An inadequate terminator will result
in various SCSI bus issues, including bus hangs and Read/Write failures. See the “Troubleshooting” chapter of the Product Manual for additional information.
Note:
You cannot mix tape drives from different manufacturers (IBM and HP, for example).
Fibre Channel connections:
1 — Connect Fibre Channel cable
2 — Connect Power cord
FC
FC
E
P
SCSI connections (SAS only):
1 — Connect SAS cable
2 — Connect Power cord
S
S
E
P
1
2
Unpack the Library
Before you begin
1 — Ensure that you have all the required items before you proceed (see Accessories and Additional Items on page 1).
2 — Locate an appropriate area for the unit that has adequate clearance for ventilation, minimal dust and debris, and an appropriate power source.
The unit is designed for installation in a standard 4 post, 19-inch rack.
3 — Ensure that the work area is free from conditions that could cause electrostatic discharge (ESD). Discharge static electricity from your body by touching
a known grounded surface, such as a computer’s metal chassis.
4 — The unit must be operated in the horizontal position. Do not place it on its side, and do not place objects on top of it.
Unpack the library
1 — Remove foam and accessories:
LVD SCSI cable and terminator*
Barcode labels and warranty
Ethernet cable
Power cords
Rack mount kit
2 — Lift unit only by the 2 sides
•LVD SCSI configuration only.
Important:
Save all original packing materials in case you need
to ship or move the library later.
Rack-mount the Library (optional)
If you plan to install the library in a rack,
see the Rack-mount Instructions (complete prior to Step 3).
WARNING!
The library weighs 46.1 lbs (20.9 kg). Two people are needed to move or lift the library. Most of the weight is toward the back of the library.
WARNUNG!
Die Library wiegt 20.9 kg. Es sind mindestens 2 Personen erforderlich, um die Library zu bewegen oder zu heben. Der hintere Teil der
Library hat das Größte Gewicht.
¡PRECAUCIÓN!
La biblioteca montada sobre bastidor pesa 20.9 kg. Se necesitan dos personas para mover o levantar la biblioteca. La parte trasera
de la biblioteca es la de mayor peso.
Install a Tape Drive (if Necessary)
If your library does not have a drive installed, you must first install a drive before proceeding to step 3. (If you have a drive installed proceed to step 3.)
Install the drive using the Field Instructions that are packaged with the drive.
Important:
The Field Instruction may include directions for reconfiguring the library. DO NOT CONFIGURE / RECONFIGURE THE LIBRARY PER THE
DRIVE FIELD INSTRUCTIONS. The library will be able to self-configure during Power On at step 4.
Summary of Contents for StorageLibrary T24 LTO
Page 1: ...StorageLibrary T24 LTO...
