Tandberg Data SDLT220-320 INTEGRATION, Product Manual

Page: 85 / 142

CHAPTER 5: Using Your Tape Drive
5.5.5 Loading the Cleaning Tape Into a Tabletop
Drive
N
OTE
: To use the cleaning cartridge in an Autoloader or Library
drive, refer to your owner’s manual.
Follow these steps to load an SDLT Cleaning Tape into an SDLT tabletop drive:
1.
Insert the cleaning cartridge, with the Front Slide Label Slot facing outward,
fully into the drive until the drive engages with the cartridge and begins to
take up the cleaning media. The green Drive Status LED will blink and the
cleaning cycle will begin automatically.
2.
When the cleaning cycle completes, the cartridge automatically ejects from
the drive and the yellow alert LED turns off.
N
OTE
: On the last cleaning, the cleaning cartridge will not eject.
Use the Eject button on the front of the drive to eject the
expired cleaning cartridge and dispose of the cartridge.
3.
Remove the cartridge, place it back into a plastic case, and mark the label after
each cleaning.