RDX QuikStation 4 and 8 Product Manual
7 - Physical Device Management
1021970 Rev. D
©2016-18 Tandberg Data GmbH
93
If the RDX media selected is part of an active logical volume, the following Warning
appears:
CAUTION:
Tandberg Data does not recommend ejecting RDX media that is part of an active
logical volume.
Reformatting RDX Media
You can reformat RDX media as a single NTFS partition from the Remote Management
Console.
NOTE: You cannot reformat a disk in an RDX disk configuration if the iSCSI target related to that
disk is connected to a host. You can also not reformat a disk that is part of an active
logical volume.
To erase an RDX media:
1.
From the
Physical Device
interface, select the
dock
where the RDX media is located.
2.
Click
Erase
.
3.
Click
Yes
to confirm.
Cloning Data
You can copy data from one RDX media to another by using the cloning feature in the
Remote Management Console. Disks that are part of an active logical volume may not be
used in a cloning operation.