RDX QuikStation 4 and 8 Product Manual
4 - System Configuration
1021970 Rev. D
©2016-18 Tandberg Data GmbH
42
NOTE: For QuikStation 8 10 GbE models, the 10 GbE interface cannot be bonded with the 1 GbE
interfaces if available.
4.
If desired, select a new bonding configuration.
Normally, the interfaces are bonded in pairs. Bonded interfaces act like a single
interface to the host (see
“Port Configuration Options” on page 44
for more information).
Non-bonded interfaces operate independently.
NOTE: Be sure to verify the network settings (see
) for each interface whose bonding has
been changed.
5.
Click
Change
to modify the bonding settings and return to the
Network Setting
dialog.
Bonding changes are not made permanent until
all
the network settings are saved.
6.
To change the network settings, click the
Edit
icon to display the Modify Network
Interface Settings page.
10 GbE
(RDX QuikStation 8 Single 10 GbE Model)