RDX QuikStation 4 and 8 Product Manual
5 - Logical Device Management
1021970 Rev. D
©2016-18 Tandberg Data GmbH
73
2.
From the
Logical Device
page, select
one
of the available disks that has a Protected
Volume UUID, and click
Import
.
3.
At the
Import Protected Volume Array
dialog, click
Import
to accept the import operation.
The protected volume is ready to use.
Expanding a Protected Volume
If the protected volume contains fewer than the maximum number of disks, you can expand it.
NOTE: The logical volume must be disconnected from any iSCSI host prior to adding available disks
to the logical volume.
1.
Select an available
disk
and click the
Add
button.
The Extend dialog allows you to select which available disks to add to the protected
volume.
NOTE: Write-protected and damaged media are not allowed in this operation.