Tandberg Data LTO 1, Setup, Operator, And Service Manual

Page: 88 / 118

9. Manually rotate the loader motor gear (see
1
in Figure 26) in the unload
direction (counterclockwise) until the leader-pin block
2
reaches the last
roller
3
.
10. To prevent the leader-pin block from jamming, press down on the linkage of
the leader-pin block
4
to force the hinged section of the block upward.
11. While manually rotating the loader motor gear in the unload direction, guide the
end of the leader-pin block
5
into the white block guide (home position)
6
.
The leader-pin block will pivot so that it clears the cartridge shell.
12. Continue to rotate the loader motor gear counterclockwise until you feel
resistance and the cartridge rises and ejects. The leader-pin block must be in
home position
6
to allow the cartridge to rise and eject.
1
2
a67s0125
6
4
5
3
4
6
5
Figure 26. Guiding the Leader Pin into the Tape Cartridge
78
IBM Ultrium Internal Tape Drive
|
|