Tanco E100 SA, Operator'S Handbook Manual, Page: 28 / 88

Tanco Autowrap - E100
Operator’s Manual
27
Manually reset No. of Wraps to Zero
Press to select
Press and hold
Programme the Target Wraps
Hold continuously
...The 3rd digit flashes
Hold to cycle to the required digit then release,
otherwise press once…
...The 4th digit flashes
Hold to cycle to the required digit, release all.
Program Early Warning Alarm
An early warning alarm can be programmed to sound from 1 to 9 wraps before the target
number is reached. Depending on the setting, the alarm will sound long beeps for up to 8
wraps, short beeps for the final wrap, and then a continuous beep for three seconds. For ex-
ample, if the bale requires 22 wraps and you want an alarm at 20 wraps, then set the number
to 2. To effectively disable the alarm, set the number to 0.
Press to select
Hold continuously
...the 4th digit flashes
Hold to cycle to the required digit, release all.
7. CONTROLLER INFORMATION