Tanco E100 SA, Operator'S Handbook Manual, Page: 26 / 88

Tanco Autowrap - E100
Operator’s Manual
25
7. CONTROLLER INFORMATION
Introduction
The instrument has 6 channel functions with an illuminated 4 digit LCD display, 5 switches to control all functions and an internal alarm. An external alarm is optional.
The instrument is normally powered on via the vehicle ignition circuit and recalls the function displayed when the instrument was last used.
What can it do ?
- Continuously displays the current number of wraps around the bale alongside the desired (Target) number of wraps preset by the operator.
- Sounds an alarm at a preset number of wraps before the target number is reached.
- Automatically senses when the bale wrap sequence ends and records it to each of these memory registers:
- Grand Total
- Part Total
- One of eight selectable Store Totals
- Displays the number of bales wrapped per hour, within any desired time period.
- Displays bale wrapping speed in rpm, and sounds an alarm when a preset speed is exceeded.
- Film break alarm and automatic stop.
- Adjustable turntable stop position.
Current No. of Wraps
Target No. of Wraps
Channel Indicator
Override the automatic Cut & Start opening on final turn.
Programme Key
Select Channel
- Set Target Wraps
- Set Alarm Threshold
- Reset Totals
Put the wrap arm into slow speed and open Cut & Start.