Tanco E100 SA, Operator'S Handbook Manual, Page: 17 / 88

Tanco Autowrap - E100
Operator’s Manual
16
6. MACHINE SETUP
Hydraulic Connection
Connect the hydraulic feed hose (with the red dust cap) to a single or double acting remote coupling on the tractor. Make sure the coupling is not under pressure when connecting.
The return hose should be connected to a free return coupling on the tractor.
NOTE: The return hose is fitted with a non-return valve to protect the Autowrap from damage in the event
of incorrect connecting to the tractor hydraulics.
NOTE: To ensure the maximum efficiency and longevity of hydraulics components this machine requires a
clean supply of hydraulic oil.
IT IS RECOMMENDED THAT THE TRACTOR HYDRAULIC FILTER ELEMENT TO BE REPLACED AND THERE AFTER
MAINTAINED IN ACCORDANCE WITH THE MANUFACTURES RECOMMENDATIONS.
Control Levers
Mount the control levers (1) in the tractor cab on the mounting (2) and socket (3) supplied see fig 6.3.
Place them in a position that is in comfortable reach of the driver and where he has good visibility of the
machine when operating them. Route the control cables to avoid sharp edges and bends. Allow for
movement of the cables when the tractor is turning.
Open/ Closed Centre Hydraulic Systems
The E100 control valve is set as standard for tractors with Open Centre
hydraulic systems. To adapt the valve to a closed centre system, replace the
Open Centre plug with the longer Closed centre. See 6.4
1
2
3
Open Centre Plug
Main Valve
Fig. 6.3
Fig. 6.4