14
Tanco Autowrap 1514-1510
Operator’s manual
4.5
THREE POINT LINKAGE.
AUTO WRAP 1500 / 1504 /TWIN is intended for rear mounting to the three point linkage,
category 2. (Fig. 4-8). For transportation the three point linkage brackets are not always
mounted on the machine when it leaves the factory. (See spare parts list chapter 2-1 for more
details).
When attached to three point linkage, make sure the machine is level across the tractor. Tight
up and lock the lifting arms so there is no sideways movement.
4.6 TOP
LINK.
Adjust the top link of the tractor so that the machine is level with the ground. It is recommended
to use a hydraulic top link, as this makes it easy to adjust the angle of the machine.
During the wrapping process it is recommended to tilt the machine towards the tractor, as this
will prevent the bale from falling off the rollers. (See fig. 4-9).
4.7 FRONT
MOUNTING.
As extra equipment the machine can be equipped with attachment brackets for front loader or
wheel loader. (See spare parts list chapter 2-2 for what types of brackets there are).
You also need longer hydraulic hoses. (See spare parts list chapter 4-2 for more details).
When front-mounted there must be mounted a large enough counterweight in the three point
linkage, this is to secure the tractors stability.
