tams
elektronik
FD-R Basic 2
English
Basic settings
Name of CVs /
MM-registers
No.
Input value
(Default)
Remarks and Tips
Consist-
Control
for F1 to F8
21
0 ... 255 (0)
F1 on
1
F2 on
2
F3 on
4
F4 on
8
F5 on
16
F6 on
32
F7 on
64
F8 on
128
Settings in CV #21 have no effect unless in CV #19 a consist address has been programmed.
RailCom
settings
28
0 ... 3 (3)
no feedback
0
channel 1 on
1
channel 2 on
2
Channel 1: Continuous feedback of the decoder address
Channel 2: Feedback of the CV values after a RailCom read-out command
Configuration
data 1
29
0 ... 64 (14)
Direction "Standard"
0
Reverse direction
1
14 speed levels
0
28 or 128 speed levels
2
Analoge recognition off
0
Analoge recognition on
4
RailCom off
0
RailCom on
8
Basic addresses
0
Not for MM mode: Extended addresses
32
Factory settings: Direction = "Standard". 28 or 128 speed levels in DCC-mode. Automatic
analogue recognition = "on". RailCom = "on". Basic addresses.
Example: CV #29 = 0.
à
Direction = "Standard". 14 speed levels. Automatic analogue
recognition = "off". RailCom = "off". Basic addresses.
Example: CV #29 = 46.
à
Direction = "Standard". 28 or 128 speed levels in DCC-mode.
Automatic analogue recognition = "on". RailCom = "on". Extended Addresses.
Tip: If the use of extended addresses is activated in CV #29, the decoder does not react to
signals in Motorola format!
Page 29
