tams
elektronik
English
FD-R Basic 2
Problems with the combined decoder
After programming the FD-R Basic 2 the
decoder not compatible to
RailCom combined with the FD-R Basic 2 does not react like before.
Possible cause: You have altered values in the function decoder area
of the FD-R Basic 2. As the other decoder´s address is the same as
the one of the FD-R Basic 2, the changes were taken over for the
decoder as well.
à
Set the value "1" for CV #888. Then you
program the RailCom transmitter area and the combined decoder not
compatible to RailCom. The function decoder area of the FD-
R Basic 2 will be unchanged.
Problems with the POM-Update
While updating the decoder the lighting starts to flash, the update is
interrupted.
Possible cause: The settints for the POM-Update are wrong.
à
Check and alter the settings if necessary. The helpfile contains
explanations.
Page 36
