English
FD-M
Page 50
§
A function or an output cannot be switched on.
Possible cause: The values set in CV# 53 to 56 for a function and
an output, contradict one another.
à
Alter the values for CV #53 to
56.
§
The lighting does not correspond to the direction of travel.
Possible cause: The configuration data (CV29) of the locomotive
decoder in the train vary from the configuration data programmed
in the function decoder.
à
Change the programming or the
function or the deocder.
§
The lighting goes on and off when the speed levels are turned up
or the lighting cannot be switched on or off.
Possible cause: The speed mode of the decoder and the digital
control unit do not correspond. Example: The central is set to the
mode 28 speed levels, but the decoder to the mode 14 speed
levels.
à
Change the speed mode at the central and / or at the
decoder.
§
The decoder does not react in analogue mode.
Possible cause: The analogue mode is switched off.
à
Alter the
value for CV #29.
§
The decoder does not react to the change direction command in
analogue mode.
Possible cause: The wrong analogue mode has been defined in
CV#12.
à
Alter the value for CV #12.
If you cannot find the problem, please return the decoder for repair
(address on the cover page).
