![background image](http://html1.mh-extra.com/html/tams-elektronik/railcom-rcd-2/railcom-rcd-2_manual_3474788004.webp)
English
RCD-2
Checking the package contents
Please make sure that your package contains:
one kit, containing the components listed in the parts list and one
PCB or
one ready-built module or
one ready-built module in a housing (complete unit),
one jumper for programming the address,
3 distortion resistors (1 piece 120
W,
2 pieces 4,7 k
W),
a CD (containing the manual and further information).
Required materials
For assembling the kit you need:
an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
a tip-cleaning sponge,
a heat-resistant mat,
a small side cutter and wire stripper,
as necessary a pair of tweezers and long nose pliers,
electronic tin solder (0,5 mm. diameter).
In order to connect the module you need wire. Recommended
diameters:
data bus: > 0,1 mm². It is recommended to use twin wire (e.g. LiYz,
2x0,19 mm², red-brown, item no. 73-30037);
connections to the rails and the booster: > 0,25 mm²;
connections to the integrated track occupancy indicator: > 0,1 mm²;
connection of downstream circuits to the switching outputs:
>
0,1 mm²
connections to the detector´s power supply: >
0,25 mm².
Page 4
tams
elektronik