tams elektronik LD-G-43, Manual, Page: 46 / 68

LD-G-43 t a ms elektronik
Example: Programming for shunting operation
Hint: The connection of the return conductor is not shown.
Outputs off/on with function
F0f F0r AUX1 AUX2 F0 F1 F2 F3 F4 … F28 ---
Values 1 2 4 8 0 1 2 3 4 … 28 255
CV
name
CV-No. Set value CV-No. Set value
F0 f 257 5 (outputs F0f and AUX1) 260 3 (= F3 / shunting operation)
F0 r 261 10 (outputs F0r and AUX2) 264 3 (= F3 / shunting operation)
F3 f 281 12 (outputs AUX1 and AUX2) 284 255 (= no F assigned)
F3 r 285 12 (outputs AUX1 and AUX2) 288 255 (= no F assigned)
With this programming you achieve the following effects when switching on the shunting
mode (here with function F3):

The three-light head signals (AUX1 and AUX2), which in normal operation are switched
with F0 depending on the direction of travel, are switched off.

The end-of-train signals (F0f and F0r), which in normal operation are switched with F0
depending on the direction of travel, are switched off.

The three-light head signals (AUX1 and AUX2) on both sides are switched on (shunting
lighting).
46 | Configuration variables and registers