tams elektronik
LC modules
English
Connecting an additional load (LC-16)
With the LC-16 the output 1 is designed for the connection of additional
accessories (e.g. houses´ lightings), to be switched on via the dim switch
commonly with the street lamps connected to the outputs 2 to 5.
Accessories with a current consumption of max. 100 mA can be
connected directly, accessories with a higher current consumption have
to be connected via a monostable relay 1xUm 12 V (e.g. item no. 84-
61010-01) and a diode (see connection diagram).
7.5. Connecting the LC-24
Connecting cascaded LC-24 modules
You can connect further LC-24 modules to the outputs of your LC-24
(also in addition to lamps or LEDs), in order to switch them on and off
together with one single switch. As each LC-24 module has to be
connected directly to the voltage supply, there is no need to take into
account additional modules when calculating the current for the
outputs.
On the left:
Sequence after switching
on module 24/1 for
connection example on
page 32.
Page 31