English
HELIOS
the voltage supply for approx. 1 second. LED 1
flashes and the locomotive starts shuttle
operation from its starting track.
When the terminus stations have been chosen,
the locomotive runs through the intermediate
stops. At the stations not chosen for
programming, the duration for accelarating and
braking is minimized.
Setting the duration
of accelarating and
braking
By turning trimpots 1 and 2 you alter the
duration of accelarating and braking.
Trimpot 1: Accelarating | Trimpot 2: Braking
The changes will be implemented immediately.
Saving the settings By pressing the push-button you save the set
duration of accelarating and braking. Please
note: The settings can only be saved when the
locomotive approaches the starting station. For
that reason you have to keep the button pressed
until the LEDs 2 to 4 start to flash quickly.
HELIOS shows taking over the settings by the
LEDs 2 to 4 flashing slowly.
Changing to making
further settings or
finishing the
programming mode
Change the jumpers´position and press the
button anew or
Switch off the voltage supply in order to finish
the programming mode.
Page 48
Summary of Contents for HELIOS
Page 59: ...HELIOS English Page 59...
