English
HELIOS
4. Turning the trimpots to left limit stop.
Before any
programming
step, turn both trimpots to left limit stop. Otherwise, the locomotives
possibly run too fast after changing into the programming mode, or the
the phases for accelerating, braking and halting are too long.
At any time, you can alter single settings. The other settings remain
unaffected by the changes.
6.3. Setting the maximum speed
Choosing a locomotive for programming
Locomotive 1
Starting positiong: track 1
–- inserted
Locomotive 2
Starting positiong: track 2
1 inserted
Locomotive 3
Starting positiong: track 3
2 inserted
Locomotive 4
Starting positiong: track 4
1 and 2 inserted
You can put locomotives 1 and 2 or locomotives 3 and 4 on the tracks
at once, in order to program them one after the other. The tracks of
the opposite terminus station always have to be open when changing
into the programming mode.
Page 44
Summary of Contents for HELIOS
Page 59: ...HELIOS English Page 59...
