tams
elektronik
Booster B-3
English
Pin assignment of the booster ports
Märklin booster port
DCC booster port
1
short circuit warning wire
1
short circuit warning wire
2
earth
2
data (-)
3
direct voltage appr.+ 19 V
3
data (+)
4
booster "on / off"
5
data
Connecting an additional booster
To connect an additional booster please use the Märklin or DCC booster
port "still disengaged". Please note: If you have connected a booster
via the Märklin-compatible booster port to your central unit you have to
connect the additional booster via the "still disengaged" Märklin-
compatible booster port. The same goes by analogy for the DCC
booster ports.
Hint: Only use boosters of one type and made by one manufacturer to
avoid problems such as:
Problems with data transfer to the decoders.
Current leakage that make locomotives move by themselves when
other locomotives cross the borders between two track sections.
Short circuits when crossing sections.
Page 13
Summary of Contents for Booster B-3
Page 1: ...t a m s e l e k t r o n i k Manual Booster B 3 Item no 40 19327 tams elektronik n n n ...
Page 21: ...t a m s e l e k t r o n i k Booster B 3 English Page 21 ...
Page 22: ...t a m s e l e k t r o n i k English Booster B 3 Page 22 ...
Page 23: ...t a m s e l e k t r o n i k Booster B 3 English Page 23 ...