![background image](http://html1.mh-extra.com/html/tams-elektronik/booster-b-3/booster-b-3_manual_3461448006.webp)
tams
elektronik
!
English
Booster B-3
3. Safety instructions
Risk of fire
The booster is cooled by a heat sink to prevent overheating. Thus be
careful to allow the air to flow unhindered through the heat sink at the
booster´s back. If the airflow is blocked components can overheat and
catch fire.
Risk of electric shock
Touching powered, live components,
touching conducting components which are live due to malfunction,
short circuits and connecting the circuit to another voltage than
specified,
impermissibly high humidity and condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:
Only operate indoors in a dry environment.
Wiring should only be carried out when the booster is disconnected.
Only use low power for this device as described in this manual and
only use certified transformers.
Only connect the transformer in an authorised manner to the house
power supply.
Use adequetly thick cable for all wiring. Too thin a cable can
overheat.
If the layout is exposed to condensation, allow at least two hours for
drying out.
Page 6
Summary of Contents for Booster B-3
Page 1: ...t a m s e l e k t r o n i k Manual Booster B 3 Item no 40 19327 tams elektronik n n n ...
Page 21: ...t a m s e l e k t r o n i k Booster B 3 English Page 21 ...
Page 22: ...t a m s e l e k t r o n i k English Booster B 3 Page 22 ...
Page 23: ...t a m s e l e k t r o n i k Booster B 3 English Page 23 ...