LD-G-6
English
Page 27
!
The locomotive decoder outputs
The locomotive decoder has seven outputs that can be connected to
accessories that have a current consumption of maximum 500 mA each.
Caution:
The maximum total current of all connected loads including the motor is
3A!
Output X4
Light forward motion
Output X5
Light reverse motion
Output X6
Optional accessory, switched via function
F1
Output X7
Optional accessory, switched via function
F2
Output X8
Optional accessory, switched via function
F4
Output X9
Optional accessory, switched via function
F6
Output X10
Optional accessory, switched via function
F5
Function F0 (Light)
The lights for forward and reverse motion can be switched from the
digital control unit. You can either set the lighting according to the
direction of travel or a fixed light for both directions of travel by
programming the configuration variable CV 56.
Functions F1, F2, F4 to F6
These functions allow accessories connected to the assigned outputs to
be switched on or off. They are intended for optional accessories (e.g.
smoke generator, cab lighting, sound module).
Function F3
The Function
F3
allows the switching to the shunting gear. This
facililtates a fine speed control for shunting operations at low speeds.
Higher speeds are not possible in this mode.