![background image](http://html1.mh-extra.com/html/tams-elektronik/22-01-048/22-01-048_manual_816277015.webp)
LD-G-6
English
Page 33
!
Contact Connection
Colour of cable
Connecting points
1
Motor connection 1
orange
X11
2
Lighting back (-)
yellow
X5
3
Not used or F1
green
X6
4
Power supply left
black
X1
5
Motor connection 2
grey
X12
6
Lighting front (-)
white
X4
7
Common conductor
for all functions (+)
blue
X3
8
Power supply right
red
X2
Attention:
When the current intensity is higher than 1A, the the wires should have
a diameter of at least 0,22 mm². This is especially important in the
wiring of the rail current collectors and the motor.
Programming the locomotive decoder
The locomotive decoder is programmed from the digtial central. See
chapter in the manual of your digital control unit where the
programming of configuration variables (CVs) is explained.
You can programm the following locomotive decoder variables: