English
LD-G-6
Page 34
CV-name
CV-
no.
input
value /
(state of
delivery)
remarks
Basic address
1
1 ... 127
(3)
Starting voltage
2
0 .... 255
(10)
= the voltage to be output to
the motor at speed level 1.
The value "0" corresponds to 0
Volt, the value "255" to the
max. voltage.
Acceleration rate
3
1 .... 255
(1)
= length of the delay before
the switching to the next higher
speed level when the
locomotive is accelerating
The delay is calculated as
follows:
(value of CV#3) x 0,9 sec. /
number of speed levels
Braking rate
4
1 ... 255
(1)
= length of the delay before
the switching to the next lower
speed level when the
locomotive is braking.
The delay is calculated as
described in CV#3.
Maximum voltage 5
2 ... 255
(255)
= the voltage to be output to
the motor at the highest speed
level.
The value "2" corresponds to
0,8 %, the value "255" to 100
% of the max. voltage.