Wire Bushing
Next, adhere the included Rubber Isolation Tape
to the bottom of the 2500 box unit.
Then, position the 2500 box assembly
over the Drop Down Door assembly
as shown.
Note: Wire Bushing position vs Actuator
Fasten the unit to the framing
with the included mounting screws.
Do not over tighten the screws, since this may
reduce the vibration isolation qualities of the
foam gasket.
Page 7
HV2800 Kaze/HV2800D Venti
Whole House Fan Installation Manual,
HV2800.
4
©
Tamarack Technologies,
Inc All Rights Reserved 20
20
