manualshive.com logo in svg

Tamarack Industries Thawzall HEATZONE TCH250, Operator'S Manual

Share
Download
Tamarack Industries Thawzall HEATZONE TCH250 Operator'S Manual Download Page 12

11

     SIGN-OFF FORM

Tamarack Industries follows the general Safety Standards specified by the Society of Automotive Engi

-

neers (SAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operat-

ing and/or maintaining the Heat King must read and clearly understand ALL Safety, Operating and Mainte-

nance information presented in this manual.

Do not operate or allow anyone else to operate this equipment until such information has been reviewed. 

Annually review this information before the season start-up.

Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment. 

We feel that an untrained operator is unqualified to operate this machine.

A sign-off sheet is provided for your record keeping to show that all personnel who will be working with the 

equipment have read and understand the information in the Operator’s Manual and have been instructed 

in the operation of the equipment.

DATE

EMPLOYEES SIGNATURE 

EMPLOYERS SIGNATURE

 

SIGN-OFF FORM

 

Summary of Contents for Thawzall HEATZONE TCH250




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands