English
Via Mantova, 177/A - 37053 Cerea (VR) Italy
Ph. +39 0442 330422
Fax +39 0442 331054
e-mail: [email protected] - www.fadini.net
TECHNICAL DATA
ELECTRIC MOTOR
Absorbed
power
2.200
W
Power
supply
230
V
Frequency
50
Hz
Rated
current
6
A
Maximum current
12 A
Intermittent service
S3
Capacitor 40
μF
HYDRAULIC MOTOR PUMP TUNIT 3.20LP
Pump
type
P20
Working pressure
1 MPa (10 bar)
Working temperature
-20 °C +80 °C
Oil type
Fadini oil - code 708L
Reservoir capacity
3 liters
Protection
grade
IP
67
BOLLARD
Post
diameter
Ø
275
mm
Post
thickness
12
mm
Post height
1.000
mm
Post finish
polyester powder coating RAL 7016
Post
material
S355J2H
steel
Ground casing
hot dip galvanized
Piston
diameter
30
mm
Shaft
diameter
16
mm
Piston
stroke
1.010
mm
Factory set thrust power
61 daN (61 kg)
Frequency of use
very intensive (
3
.000 cicles/day)
Led power adaptor
in: 230 V - 50 Hz out: 12 Vdc 600 mA
Led top lights
12 Vdc
Impact resistance
150.000 J
Breakout resistance
700.000 J
Max. static load
20.000 kg
Weight with casing
360 kg
Environment working temperature -20 °C +80 °C
Environment working temperature
with heating device
-40 °C + 80 °C
Rising time [speed]
~ 5,50 s [18 cm/s]
Lowering time [speed]
~ 4,10 s [23 cm/s]
24
52
43
93
2.100
7.500
SPEED
of vehicle (k
m/h)
150.000 J
700.000 J
MASS
of vehicle (kg)
Various factors, such as the compaction index, soil
permeability coefficient and kind of concrete may reduce the
values indicated in the diagram even significantly.
475
570
400
475
575
Ø 275
1.000
1.510 mm
anti-terrorism oil-hydraulic automatic bollard
2020/02
PRODUCT SPECIFICATIONS
Fully retractable automatic bollard for very heavy duty applications, made up of an incorporated oil-hydraulic motor pump unit
and an oil-hydraulic actuator inside the moving cylinder. Designed in compliance with ASTM/PAS 68 K4/M30/C730 specifications
(vehicle of 7,5 t at a speed of 48 km/h). Suitable for access protection to sites under attack risk (anti terror) such as military bases,
embassies, banks, government institutions, etc. IP67. The height of the rising cylinder (from ground) is 1.000 mm. Rising cylinder
made of S355J2H steel, thickness 12 mm, cataphoresis treated and powder coated. AISI 304 brushed stainless steel cover sleeve
available for the rising cylinder. Rubber ring on rising cylinder head. Cataphoresis treated aluminium cover, finished to provide a
slip-proof treading surface. Rising cylinder fitted with high intensity, microprismatic, retroreflecting approved sticker (h 80 mm),
and 12 signalling LEDs with flashing light all around the top. Frequency of use 3.000 cycles/day. Hot dip galvanized steel casing
for ground foundation. Impact resistance 150.000 J, breakout resistance 700.000 J. Static load max 1.500 kg in standing position,
max 20.000 kg in lowered position. Working temperature -40 °C +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power
2.200 W. Connector and junction box IP 66 for cabling. Rising time ~ 5,50 s. Hydraulic device locking the bollard in standing
position.
C730
GB
2012/19/UE
Directive
Re. disposal of electric
and electronic waste
DISPOSE PROPERLY OF MATERIALS
ARMFUL TO THE ENVIRONMENT
