TallyGenicom LA48N User Manual Download Page 98

Page: 98 / 206

Using Set-Up Mode

5-32

Menu Access Option and Values

Overprinted values are the factory settings.

Menu Access Options Values

Description

<MENU-ACCES>

ALL FUNC

MACRO ONLY

NO ACCESS

NO PANEL

Specify the type of access to the Set-Up
functions from the control panel or from
the <FUNCTIONS> menu.

All functions are accessible.

Only MACRO 1 and MACRO 2 functions
are accessible from the <FUNCTIONS>
menu.

Set-Up mode is inaccessible.

Font, Macro, and Protocol buttons are
disabled even in Normal mode. Set-Up
mode is also inaccessible.

NOTE:

You can return to the All Func-

tions Accessible mode by turning the
printer on while pressing the

Pause

Park

and

buttons at the same

time.The printer enters the Set-Up mode
with this operation.

Summary of Contents for LA48N















































































































































































































Search results

Summary of Contents for LA48N

Reviews:

Related manuals for LA48N

Brands by name

Popular brands

TallyGenicom LA48N, User Manual

Search results

Summary of Contents for LA48N

Reviews:

Related manuals for LA48N

Brands by name

Popular brands