Talley UAC40-5/6-08, Technical Manual

Page: 318 / 353

TM 5-4120-375-14
B-3 .
Explanation of Columns in the MAC, Section II. (cont).
e. Column
(5),
Tools and Equipment. Column
5
specifies, by code
those common tool sets (not individual tools) and special tools,
TMDE, and support equipment required to perform the designated
function.
f. Column
(6),
remarks. This column shall, when applicable, contain
a letter code, in alphabetic order, which shall be keyed to the
remarks contained in Section IV.
B-4 .
Explanation of Columns in Section III.
a.
b.
c.
d.
e.
Column (1), Reference Code.
The tool and test equipment reference
code correlates with a maintenance function on the identified end
item or component.
Column (2), Maintenance Level. The lowest level of maintenance
authorized to use the tool or test equipment.
Column
(3),
Nomenclature.
Name or identification of the tool or
test equipment.
Column (4), National/NATO Stock Number. The National or NATO
stock number of the tool or test equipment.
Column
(5),
Tool Number.
The manufacturer's part number.
B-5 . Explanation of Columns in Remarks, SECTION IV.
a. Column 1, Reference Code. The code recorded in column 6, Section
II.
b. Column 2, Remarks. This column lists information pertinent to the
maintenance function being performed as indicated in MAC,
Section II.
B-4