background image

Introduction

Thank you for choosing to use the Talley ATTIVO™ seating system. In doing so you have selected 

an effective product for the prevention and management of pressure ulcers which is suitable 

for seated patients with reduced mobility who are at high risk of pressure damage.
Suitable for use within all care environments, the  ATTIVO™ seating system features  an 

alternating air pressure cycle to provide a continuous pressure-relieving wave, helping to 

promote circulation to areas normally occluded during prolonged seated periods. Dual power 

technology offers both mains and battery operation, enabling at least 24 hours of continuous 

running time on a full battery charge.
The system will benefit from careful installation and use, providing a long and effective service 

life. Please read this user manual in order to achieve the best possible results.

List of Components and Accessories

Your ATTIVO™ seating system should comprise the following items - please ensure you have all 

of these before installation.

l

  ATTIVO™ power unit 

Mains lead with integral power supply (15V Mains adapter FW7362M/15)

l

  Power unit carry case

l

  TS209 B.A.S.E.

®

 SEQUENTIAL cushion  

or

  B.A.S.E. 

®

 Recliner Mat

The following accessories/spares are also available:-

12V Vehicle adaptor / charger

l

  Spare mains lead with integral power supply (15V Mains adapter FW7362M/15)

Cautions and Warnings

CONTRAINDICATIONS FOR USE

Alternating pressure therapy should not be used for patients with unstable fractures, gross 

oedema, burns or an intolerance to motion.

There are no special skills required to operate the system.

The medical professional is responsible for applying his/her best medical judgment when 

using this system.

Select correct setting for therapy required. Care should be taken not to accidently change 

pressures once set as the efficiency of the therapy may be reduced. This could also be 

caused by pets, pests or children.

The electricity supply is of the type indicated on the power unit

Check the mains lead is free from damage and is positioned so as not to cause an 

obstruction, or injury, e.g. strangulation.

Ensure the mains lead or pump cannot become trapped or crushed, e.g. via raising or 

lowering of bed or bed rails or any other moving object.

The power unit must only be used with a suitable approved cord and plug set as supplied 

by Talley.

The system is not used in the presence of flammable anaesthetics.

2

Summary of Contents for ATTIVO













Reviews: