background image

 Model TS-9133i Installation Guide

iii 

SOFTWARE LICENSE AGREEMENT

TalkSwitch, hereinafter known as “Seller,” grants to Customer a personal, 
worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use 
license to use Software in object form solely with the Equipment for which the 
Software was intended. This Product may integrate programs, licensed to 
TalkSwitch by third party Suppliers, for distribution under the terms of this 
agreement. These programs are confidential and proprietary, and are protected as 
such by copyright law as unpublished works and by international treaties to the 
fullest extent under the applicable law of the jurisdiction of the Customer. In 
addition, these confidential and proprietary programs are works conforming to the 
requirements of Section 401 of title 17 of the United States Code. Customer shall not 
disclose to any third party such confidential and proprietary programs and 
information and shall not export licensed Software to any country except in 
accordance with United States Export laws and restrictions.

Customer agrees to not reverse engineer, decompile, disassemble or display 
Software furnished in object code form. Customer shall not modify, copy, reproduce, 
distribute, transcribe, translate or reduce to electronic medium or machine readable 
form or language, derive source code without the express written consent of the 
Seller and its Suppliers, or disseminate or otherwise disclose the Software to third 
parties. All Software furnished hereunder (whether or not part of firmware), 
including all copies thereof, are and shall remain the property of Seller and its 
Suppliers and are subject to the terms and conditions of this agreement. All rights 
reserved.   

Customer’s use of this software shall be deemed to reflect Customer’s agreement to 
abide by the terms and conditions contained herein. Removal or modification of 
trademarks, copyright notices, logos, etc., or the use of Software on any Equipment 
other than that for which it is intended, or any other material breach of this 
Agreement, shall automatically terminate this license. If this Agreement is 
terminated for breach, Customer shall immediately discontinue use and destroy or 
return to Seller all licensed software and other confidential or proprietary 
information of Seller. In no event shall Seller or its suppliers or licensors be liable for 
any damages whatsoever (including without limitation, damages for loss of business 
profits, business interruption, loss of business information, other pecuniary loss, or 
consequential damages) arising out of the use of or inability to use the software, 
even if Seller has been advised of the possibility of such damages.

TalkSwitch will not accept liability for any damages and/or long distance charges 
which result from unauthorized and/or unlawful use. While every effort has been 
made to ensure accuracy, TalkSwitch will not be liable for technical or editorial 
errors or omissions contained within this documentation. The information 
contained within this documentation is subject to change without notice. 

Copyright 2007 (under license). All Rights Reserved. 

Summary of Contents for TS-9133i


































Reviews: