Talkswitch TS-9133i, Installation Manual

Page: 23 / 33

Model TS-9133i Installation Guide 17
Using your TS-9133i IP Phone with TalkSwitch
Cancel Transfer
1. Press
T
while in the transfer state.
2. Select the flashing line key (Eg.
g
) associated with retrieving the
call placed on hold.
Conference Call
1. Press the
l
key to put the first party on hold.
2. Call the second party (first dial 9 or 81-88 for external calls).
3. Press the
U
key to dial the second party.
4. Once the 2nd party answers, press
l
to join all parties in the
conference call.
Park a Caller
Press
M
Park; otherwise, press
k
then dial
›
510 +
U
key. The
system responds with a parking orbit.
Retrieve a Parked Caller
1. While the phone is onhook, press
M
UnPark followed by the
specified orbit (500-509).
2. Press the
U
key; otherwise, lift the handset and dial
››
+ orbit,
then
U
key.
Paging
Two-way intercom paging to TalkSwitch phones from TS-9133i
1. Press
M
Intercom key + extension.
2. Press
U
key; otherwise, dial
›
84 + extension, then
U
key.
PA overhead paging
Press
M
Page; otherwise, dial
›
0.
Attach Account Code to Last Call*
At dial tone, dial
›
88 + <Account code>
‹
.
*CDR logging must be active on the TalkSwitch system
.
Engaging Line/Ext/Queue Appearances
1st call
Press the key associated to the
M
Line/Ext/Queue light that is flashing
(ringing or on hold).
Additional calls
1. Press the
O
key to put the current caller on hold.
2. Pick an available line (Eg.
g
) then press the key associated with
the
M
Line/Ext/Queue light that is flashing (ringing or on hold).