Talkswitch TS-9133i, Installation Manual

Page: 17 / 33

Model TS-9133i Installation Guide 11
Installation and Setup
Install on the Wall
1. Mount the supplied Telephone Stand to the wall using the two
pre-drilled holes in the stand.
Warning: Ensure that wall anchors and screws are of a sufficient
grade to withstand the weight of the phone and cables.
2. Attach the network and power cable to the phone as per the section
“Connecting to the network and to Power.”
3. Attach the handset and headset to the phone as per the section
“Connecting to the network and to Power.”
4. Attach the phone to the stand by placing the phone so that the top four
slots on the bottom of the phone line up with the tabs on the stand. Then
push the phone downward until it snaps into place.