4 4
T S - 5 5 0 i U S E R G U I D E
•
Call Forwarding:
is not supported directly by the TalkSwitch phone. Call forwarding is configured in
the TalkSwitch system for busy, no answer and DND conditions for the extension.
•
Direct Call (Hotline/Warm-Line):
When used with the TalkSwitch system, the feature is controlled
by the configuration in the software for this extension. No configuration is required.
•
Direct Call:
when enabled, places a call to a predefined destination automatically when the phone
goes off hook.
•
Direct Call Number:
defines the destination for a direct call.
•
Direct Call Timer:
sets a delay timer for Warm-Line operation. The timer specifies the period
before placing a direct call. The timer supports 1 second increments from zero (0) to ten (10)
seconds. For Hotline operation, set the timer to zero (0) seconds.
To modify parameters on the Call Preferences screen:
•
Select the desired parameter and enter or select the new values.
•
When complete, select the
Save
button to save the new values to the phone.
DIAL PLAN
The phone incorporates a dial plan, which monitors the user-dialed digits for patterns matching the dial plan
number. If a match occurs, the phone modifies the digits and processes the call using the configured script
in the dial plan. The phone supports a digit map plan or routing table plan. If used with the TalkSwitch
system, then these maps are automatically generated.
Routing Table
Up to fifty (50) dial plan numbers may be defined in the Routing Table. Specific entries for the Routing
Table are:
•
Number:
The digit pattern to match with the user-dialed digits.
•
TRNC:
Defines the number of digits to delete (truncate) from the number dialed.
•
Pre:
Defines the digits to insert in front of the number (including if truncated).
