Talkswitch TS-550i User Manual Download Page 2

Page: 2 / 83

COPYRIGHT INFORMATION

TalkSwitch

®, the TalkSwitch logo,

Concero

®,

answers with intelligence

®,

owner friendly

™,

vendor friendly

™,

seller friendly

™ and

channel

friendly

™ are registered trademarks or trademarks of TalkSwitch Corp. The

Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other

trademarks are the property of their respective owners.

Reproduction, adaptation or translation without prior written permission is prohibited,

except as allowed under the copyright laws.

Information in this guide is subject to change without notice and does not represent

any commitment on the part of TalkSwitch. No part of this guide may be reproduced or

transmitted in any form or by any means, electronic or mechanical, including photocopying,

recording, or information storage and retrieval systems, or translated to another language,

for any purpose other than the licensee’s personal use and, as specifically allowed in the

licensing agreement, without the express written permission of TalkSwitch.

July 2010

CT.TS005.015601

Summary of Contents for TS-550i




















































































Search results

Summary of Contents for TS-550i

Reviews:

Related manuals for TS-550i

Brands by name

Popular brands

Talkswitch TS-550i, User Manual

Search results

Summary of Contents for TS-550i

Reviews:

Related manuals for TS-550i

Brands by name

Popular brands