3 4
T S - 5 5 0 i U S E R G U I D E
Dialing from a Log
Calls can be made directly from the logs. In the case of the Missed and Received call logs, the Access Code
Prefix is automatically inserted if configured. This is important if you normally are required to dial a hunt
group to access an outside line. For the Outgoing Calls log, the number is dialed exactly as shown.
To dial from a log:
•
While viewing an entry, press the
Dial
softkey.
To edit an entry before placing a call:
•
While viewing an entry, press the
Right
navigation button, then press the
Edit
softkey.
•
A cursor is placed at the beginning of the phone number. Enter the digits required, then press the
Dial
softkey.
Deleting (single or all entries)
To delete a single entry:
•
While viewing an entry, press the
Right
navigation button, then press the
Delete
softkey.
•
Press
Yes
to delete the entry or
No
to keep the entry.
To delete all entries:
•
While viewing an entry, press the
Right
navigation button twice, then press the
Del All
softkey.
•
Press
Yes
to delete the entire log or
No
to keep the log.
Saving an Entry to the Phone Book
To save an entry to the phonebook:
•
While viewing an entry, press the
Right
navigation button, then press the
Save
softkey.
•
Press
OK
to store the current name or edit/add a name, then
press
OK
.
•
Confirm the phone number or edit as is necessary. If an Access Code
Prefix (hunt group number) has been configured for the phone, do
not add a hunt group prefix. Calls placed from the Phone Book will
automatically have the the configured Access Code Prefix inserted.
Press
OK
to continue.
•
Optionally, select a ring tone that will be used when the Call ID is matched for inbound calls.
Set to
Defaults
will use the default ring cadence and tone. Press
Select
to continue.
•
Assign an available 2-digit speed dial number (00–79), then press
OK
. This number can be used to quick
dial. For example, if stored as 02, simply dial
02
then lift the receiver to place the speed dial call.
