HTTP://GLOBAL.TALKSWITCH.COM
9
STEP 2 — CONFIGURE TALKSWITCH TO ACT AS THE
SIP SERVER
A multi-location TalkSwitch system requires that one (and only one) unit be
configured to act as the SIP server (Redirect Proxy/Registrar). For information on
the SIP server, see
Select which TalkSwitch to use as the SIP network server
on page 5.
To configure TalkSwitch to act as the SIP server:
1.
In the
TalkSwitch System Configuration
window, select
System
Information -> VoIP Configuration
from the menu on the left.
2.
Select
This TalkSwitch location is the Proxy/Registrar
. The Public IP address or
Fully Qualified Domain Name will automatically be populated in the Proxy
Server Name and Registrar Server Name fields.
3.
Leave the
Outbound Proxy
blank. In the
Realm/Domain
field, enter a name for
your network (example: abccompany).
4.
To enable authentication, select
yes (digest)
from the drop-down list below
Registrar Authentication
. Using authentication will allow only authorized
devices to access the network.
5.
If Authentication has been enabled, enter a
User/Account
name (for example,
ABC) and system
Password
.
6.
Information on reserving VoIP lines for each TalkSwitch unit is detailed in
STEP 3.
If using TalkSwitch with a VoIP Service Provider, proceed to STEP 6.
