4
3. Pair #BW1101 with any of the below suitable Digital Wireless Receivers.
4. How to Pair: Select a channel at Receiver, and long press the pairing button on the
Receiver till the Channel LED (blue) is flashing, then press the pairing button on the
transmitter module to enter pairing process, after pairing is completed and successful,
the Channel LED on Receiver will be flashing rapidly.
* During pairing, the transmitter link LED will be flashing interactively (Red and Yellow) for data
transmission; and please put transmitter and receiver as close as possible to prevent failure
due to other interference.
Technical Specification
Item
Spec
Frequency
2400 – 2483.5MHz
Output Power 0 dBm(TYP) @ Max power setting
Rx sensitivity
(BER<=1E-3)
-90dBm(TYP) @1M mode
-85dBm(TYP) @3M mode
Modulation
GFSK
Hard interface
14pin header(1.27mm)
Dimension
W/L/H , 19mm/27mm/7.3mm
Supply voltage
3.3Vdc
Current consumption
150mA(TYP) @ Tx power = 18.5dBm
35mA(TYP) @ Rx mode
Operating temperature
0~50degree
#CW1104-
Quad Digital Wireless DVR
#CW1106-
Quad 7" LCD Digital Wireless DVR