-
5
-
1.1
The Key-board description
1.2
How to Switch-Up and Shut-Down the system
Switching up and shutting down the
DREAM 2
controller are activities that deserve
some explanations:
Switching up the
DREAM 2
from a switched off state is done in 2 steps:
1.
Turning ON the
Power Switch
2.
Pushing the
Start button
About the
Power Switch
and
Start Button
see the paragraph of the
Power
Supply Board
below.
Each time the software is restarted there will be some introductory screens
displayed, then the
System manager
screen (described below) will appear for a
few seconds and eventually the
Main menu
of the DREAM application will be
displayed. The user should wait patiently until this stage is reached.
Function keys
-
F1, F2,
F3, F4 (from left to right)
handle position
dependent functions.
The functions are
specified above the keys
at the Function bar of
each screen.
Arrows for
inside screen
movement
–
moving from one
field to another
UP, DOWN, LEFT
and RIGHT
PAGE UP key
-
for moving to
screens located
above the current
screen
PAGE DOWN
key
-
for moving to
screens located
below the current
screen
MENU key
- Used
for getting back to
the Main Menu
from any other
screens
Numeric keys + Short
cut keys
- While being
inside the MAIN
MENU, each numeric
key serves for direct
jumping into the subject
whose name is printed
above the key
