TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
26
of
59
9.7 Contour following
The design of the machine has been enhanced with several pivot points with sufficient range
of movement to provide the maximum raking efficiency and smooth, undisturbed
operativeness of the machine. The pivot points allows for contour following of the uneven,
undulated ground The figure below shows the scope of movement of particular pivot points,
such as:
top linkage pin slide,
oscillating lower linkage pins,
the main pivot point with the floating pin
spring loaded stirring rods
twin–wheeled rocking beam.
The steering rods enhance the manoeuvrability of the hay rake. What is more, when the
machine is lifted or transported, the rods make it more rigid restricting the movements of
the main frame against the headstock. This in turn, reduces the risk of unexpected side
movements compromising the stability of the machine during transport. The hay rake stays
all the time behind the tractor and within its contour.
