TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
12
of
59
Do not wear loose fitting clothes such as coats, unzipped or unbuttoned jackets or
fleeces, scarfs or loose straps near the machine and tie the long hair up in a bun to
minimalize the risk of being caught by the rotating elements of the machine such as PTO
shaft or the rotor.
Under no circumstances come near the machine when it is powered
or still in motion.
Exercise special care whilst performing any service or maintenance task
near hazard zones.
When carrying post warranty service involving any welding works it is imperative to
follow the rules listed below:
o
The welding works should be done by a qualified person.
o
Ensure there is sufficient lighting and ventilation in the work area.
o
Do not weld a tractor mounted machine due to the risk of fire or electrical short.
o
After removing the layer of paint and primer, clean and degrease the surface
intended to weld. Remove excess of lubricant from the nearby greasing points
o
To minimalize the risk of causing fire remove all inflammable elements of the
machine if possible or use sufficient heat protection.
o
Do not touch freshly welded surfaces to avoid the risk of burns.
