TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
9
of
56
•
When driving on public roads, obligatorily use the electric marker lamps lighting of the
vehicle, with prior check for its functionality, visibility and cleanliness. A triangular plate
which indicate low-speed vehicles must be affixed to the equipment. Make sure the
retroreflectors and warning signs on the structural components of the machine are
clean and visible. Turn on the lamps and warning lighting.
•
Adjust the transport speed according to the road surface conditions, without exceeding
15 km/h.
•
Do not leave the vehicle with the mower on a hillside or on another sloping surface,
without securing the vehicle from rolling down. The mower should be lowered to the
ground. Put wedges under the wheels of the vehicle.
•
The mower must be adjusted to working height, during its attachment to the vehicle.
The position adjustment of the equipment during its operation is possible from the
vehicle cab without the need to leave the cab by the operator.
•
Any preparations, fitting, dismantling or adjustment can be performed only after the
drive has been switched off, the engine stopped, the vehicle immobilized and when all
the moving parts of the machine have stopped.
•
After the first hour of operation, check all disjoint connections like bolt connections.
•
The mower should be kept on a flat, level, paved surface, out of the reach of bystanders
and animals. For stabilizing the mower use the support foot.
•
During the assembly and disassembly of the mower be careful, pay special attention to
the structural elements responsible for mounting to the vehicle.
•
Before using the mower check its condition, as well as the vehicle it is attached to.
Ensure the vehicle and mower are in good technical condition. Any worn or damaged
parts must be replaced immediately.
•
The mower must be equipped with all the safety guards (provided by the manufacturer),
preventing access to any moving parts. The guards must be complete and fully
operational.
•
Before you begin working with the mower, learn how to operate it by reading this
Instruction Manual taking into account operation safety rules and guidelines for
maintenance and adjustment.
•
Weight of the mower suspended on a vehicle can affect the vehicle’s manoeuvrability.
In such situation exercise particular caution.
•
The Instruction Manual must be kept with the machine. If you loan the machine for use,
ensure that it is in good technical condition, and that it is complete with the Instruction
Manual.
•
No additional means of transport is allowed to be attached to the mower.
•
During the start-up, check the machine for functionality and make initial adjustment
without load.
