TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
32
of
56
7.3 Maintenance after work
Each time your work has finished,
use pressure washer to clean the cutting bar
and position it
on a flat and hard ground. Carry out an inspection of connections between the parts and
units. Replace damaged and worn out parts with new ones. Check all the bolted joints
and tighten any loose bolts and nuts according to Table 3.
Note:
TALEX, THE MANUFACTURER OF THE MACHINE, PROVIDES ALL SPARE PARTS
Table No. 3
TIGHTENING TORQUE VALUES FOR BOLTS AND NUTS
Durability
6.8
8.8
10.9
12.9
Metric thread
Tightening torque [Nm]
M5
4.5
5.9
8.7
10
M6
7.6
10
15
18
M8
18
25
36
43
M10
37
49
72
84
M12
64
85
125
145
M14
100
135
200
235
M16
160
210
310
365
M18
220
300
430
500
M20
310
425
610
710
M22
425
580
820
960
M24
535
730
1050
1220
Keep clean all safety signs on the machine and the triangular plate warning off slow vehicles.
At least once a year check the level of oil in the cutting unit and gearbox unit. Use SAE90EP gear
oil.
