TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
25
of
56
Start the mower only after you ensure that the safety guards are mounted and in
good working order. Also, adhere to the instructions in section 6. Operation and
maintenance. At first, always start the mower by releasing the drive clutch slowly
and paying attention to the actual functioning of the machine. Never operate the
mower if you notice any malfunctions. If so, read the Instruction Manual again
going through all the steps for setting and adjusting the mower. If this does not help, please
contact the manufacturer and report any doubts.
Keep in mind the operating range of the mower, which is to be followed by adjusting the
suspension height of the mower as shown in Fig.10.
Fig.10 Operating range of the mower
Depending on the mowing conditions, the machine can generate
noise in excess of 85dB. In such case, using hearing protectors is
recommended.
