Please read the entire instruction manual before operating the Incubating Rocking/
Waving Shaker.
Warning! Do not use the Incubating Rocking/Waving Shaker in a
hazardous atmosphere or with hazardous materials for which the unit was
not designed. Also, the user should be aware that the protection provided
by the equipment may be impaired if used with accessories not provided or
recommended by the manufacturer, or used in a manner not specified by the
manufacturer.
Always operate unit on a level surface for best performance and maximum
safety.
Do not lift unit by the tray or lid.
Caution! To avoid electrical shock, completely cut off power to the unit by
disconnecting the power cord from the unit or unplug from the wall outlet.
Disconnect unit from the power supply prior to maintenance and servicing.
Spills should be removed promptly. Biohazard spills should be cleaned up
using approved laboratory procedures. Solvent spills are a fire hazard. Stop
the unit immediately, and Do not operate until clean up is complete and
vapors have
dissipated (motor brushes arc and may ignite flammable vapors). Do not
immerse the unit for cleaning.
Do not operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
Henry Troemner LLC hereby declares under it’s sole responsibility that the
construction of this product conforms in accordance with the following standards:
Safety standards:
IEC 61010-1
Safety requirements for electrical equipment for measurement,
control and laboratory use. Part I: General Requirements.
IEC 61010-2-010 Part II: Particular requirements for laboratory equipment for the
heating of materials.
IEC 61010-2-051 Part II: Particular requirements for laboratory equipment for mixing
and stirring.
UL Std. No. 61010-1
EMC standards:
EN55022-B
EN6100-4-5
EN61000-3-3/3-2
EN61000-4-3
EN61000-4-4
EN61000-4-6
EN61000-4-11
EN61326-1 Class A
associated Eu guidelines:
EMC directive 2004/108/EC
LVD directive 2006/95/EC
RoHS directive 2011/65/EU
3
s
afety
i
nstruCtions
s
tanDarDs
& r
egulations
